JBL

MS 10SD4 SLIM

10 inch Subwoofer (500 watts) Dual 4 ohm (Shallow Mount)

Variations

 

Features

25 – 1000 watts suggested amplifier power range

25 – 1000 watts suggested amplifier power range

JBL engineers designed the MS-10SD4 SLIM shallow-mount subwoofer to produce exceptional, precise bass from an amplifier capable of delivering up to 1000 watts of power.

Shallow mounting depth

Shallow mounting depth

The MS-10SD4 SLIM subwoofer requires just 2-3/8 inches (60 millimeters) of installation depth, little more than the height of a credit card. This minimal installation depth vastly increases the number of places where you can install one or more this sub. Under seats, in rear-seat or trunk side panels (with custom enclosures), or behind a truck seat against a cab wall – wherever you want to put this subwoofer, it requires very thin installation depth.

Flat-piston polypropylene cone

Flat-piston polypropylene cone

A subwoofer cone is a diaphragm of a piston that moves air. JBL engineers reconfigured a traditional conical diaphragm as flat, rigid polypropylene material that fits in the compact MS-10SD4 SLIM subwoofer chassis and has a lightweight and stiff composition. The result is an effective low-frequency diaphragm that reduces unwanted mechanical distortion under movements up to its linear-excursion (Xmax) limits.

Dual-roll laminated fabric surround

Dual-roll laminated fabric surround

A dual-roll laminated composite surround in the MS-10SD4 SLIM subwoofer offers a low profile and tremendous UV (ultraviolet) resistance. Its polyurethane/fabric blend exerts additional restoring force on the cone at high excursion, making its low-distortion bass even better.

Progressive spider

Progressive spider

Like its surround, the MS-10SD4 SLIM’s progressive spider allows progressively more resistive force as the cone reaches higher excursion. It also helps to keep the voice coil centered in the magnetic gap during the delivery of the important bass notes.

Cast-aluminum frame

Cast-aluminum frame

A proprietary cast-aluminum frame on the MS-10SD4 SLIM subwoofer ensures a rigid chassis for the sub’s moving parts. Since cast aluminum is nonmagnetic, more of the sub’s magnetism is focused on the voice coils to control the cone’s rapid, piston-like movement and reproduce even the most complex bass sounds faithfully.

Flexible, dual 4-ohm voice-coil design

Flexible, dual 4-ohm voice-coil design

Dual voice coils in MS-10SD4 SLIM subwoofers offer the best range of wiring and system configuration options. Wire the voice coils in series for an 8-ohm load. Wire the voice coils in parallel for a 2-ohm load. When you’re using multiple subwoofers, the dual voice-coil configurations allow dual, triple and even quad subwoofer designs that match perfectly with the optimum amplifier load.

High-Q, wide-range sub-bass performance

High-Q, wide-range sub-bass performance

JBL engineers went off the charts for this revolutionary high-Q design with a very low compliance (Vas) to offer extremely effective bass performance in a small space. The low, easily moving compliance of the suspension, combined with the innovative surround and progressive spider to control cone movement as excursion is increased, gives the MS-10SD4 SLIM subwoofer unique mechanical attributes that revise conventional subwoofer thinking.

Small sealed and vented enclosure volumes

Small sealed and vented enclosure volumes

The MS-10SD4 SLIM subwoofer provides amazing bass from a modest enclosure volume. We recommend just 0.5 cubic feet (14,161 cubic centimeters) for sealed designs and 1.0 cubic feet (28,321 cubic centimeters) for vented designs. Vented enclosures provide greater output than sealed enclosures given the same power, so the vented enclosure will work with smaller amplifiers.

Spring-loaded connection terminals

Spring-loaded connection terminals

MS-10SD4 SLIM subwoofers feature spring-loaded connection terminals for both voice coils, ensuring ease of connection for a variety of wire-gauge sizes. The sub’s push terminal also makes easy work of connecting series or parallel voice coils, or wiring to other subwoofers.

MS 10SD4 SLIM - Black - 10 inch Subwoofer (500 watts) Dual 4 ohm (Shallow Mount) - Hero

Specs & Downloads

Item# MS-10SD4 SLIM_

Product Description

The skinny on resounding bass with 4-ohm impedance.

The skinny on resounding bass with 4-ohm impedance. The JBL® MS-10SD4 SLIM subwoofer is a 10-inch (250-millimeter), high-performance car audio subwoofer. It has minimal installation depth – just 2-3/8 inches (60 millimeters). Its dual 4-ohm voice-coil design permits a variety of connection options. Its advanced components include a reinforced flat-piston polypropylene cone, progressive spider, dual-roll fabric surround and nonmagnetic, cast-aluminum frame. Power handling of 250 watts RMS (1,000 watts peak) makes this subwoofer an excellent choice for virtually any system configuration.

General Specifications

Size 10
MSRP U.S. $229.95 each

Audio Specifications

Peak Power 1000W
Power Handling (RMS) 500W
Frequency Response 34Hz-800Hz
Nominal Impedance 4+4 ohms
Sensitivity (1 W @ 1m) 86dB SPL
Power Handling (Peak) 1000W

Dimensions

Mounting Depth (in) 2-1/4
Mounting Depth (mm) 60
Mounting Cutout Diameter (mm) 243
Mounting Cutout Diameter (in) 9-1/2

What's in the box?

  • (1) MS-10SD4 Slim Subwoofer
  • (1) Owners Manual

Documents & Downloads

The latest owner's manuals, quick start guides, and documents.

Reviews and Q&A

Customer Reviews

Product Q&A

Support

Search Result For ""